LPR12 Jnr MX V2
Electric LPR12™ V2
The second generation LPR12 V2, designed in Australia Little Pro Rider™ electric Bike is a lot of fun and is a great way for your child to begin learning the skills of riding motorcycles. Being light-weight and near silent, they are excellent for riding in urban backyards. With a moto style twist throttle and foot pegs, your child will quickly gain all the skills of riding a motorcycle. Because its electric powered, it is low maintenance and cheap to run- only $0.03 per charge!
- No chain, hot exhausts or fumes
- No sharp foot pegs
- Light weight at only 11.5kg!(pw50 is 40kg)
- Patented design
- Outdoor fun for kids aged 3-5!
- Maximum rider weight 30kg, maximum rider height 120cm.
- Some assembly required- 95% pre-assembled
NEW STOCK AVAILABLE END OF OCTOBER
The New LPR12 V2 will have the same great feature of the debut LPR12 first version, but with a few minor improvements and updates. The same brushless gear hub wheel motor is applied with same performance specs as V1 model. The Chassis uses the same design and geometry, with an updated battery, new wiring harness and new rear disc brake.
- New 140mm Rear disc replaces the drum brake
- New 7Ah new design battery replaces the old 5.2Ah battery. Now using Samsung cells the battery is now rated up to 800 charging cycles
- New 3A battery charger replaces the 2A charger. This means the 7Ah battery still takes 2.5hrs to charge
- Simpler and cleaner electrical wiring with only 5 connectors that are now waterproof
- New seal under frame cover to make it more waterproof
- New foot pegs- with 8mm pivot pin (was 6mm)
- New grips
- Brake cable runs inside the frame for a cleaner look
- New look graphics
"The LPR12 V2 will revolutionise the way kids learn how to ride a motorbike"- LPR Bikes Australia
With near no noise, an LPR electric bike can give your child extra "seat time" as it can be ridden in backyards without the typical noise complaints a petrol bike will get. Weighing at only 11.5kg, kids can easily pick it up and manoeuvre it around a tight space, just like how they would a bicycle.
A parent speed limiter is easily adjusted with the twist of a knob, so you can start your child at walking pace and then slowly increase the max speed as your child's skills increase, all the way up to 26km/h. Our bikes feature a bolt on cap so this speed cannot be altered children.
The brushless DC motor is located in the rear wheel making for a smooth and quiet ride. Having no drive chain also eliminates a dangerous hazard for those small fingers. The LPR12™ V2 Jnr MX features easy pull brakes with a short throw lever that is close to the bar for those small hands to reach. A durable powder coated steel frame paired with black alloy wheels, quick adjust seat height, off road knobby tyres, sealed wheel bearings and bonded rubber spring back foot pegs, all make for a stylish and unique bike.
How long do you get out of a battery?
In our testing, run times are about two hours of riding per battery, however, differences in rider weight, terrain type, rider skill level and temperature can affect run times.
How long does the bike take to charge?
The battery takes 2.5hrs to charge from empty. Just like a modern lithium powered smart phone or laptop, you do not need to completely discharge the battery before re-charging. Charge at any time during the full-empty cycle. You can also stop charging and go riding before the battery is completely charged. The battery management system (BMS) built into the battery, will automatically monitor the battery for voltage and cell balance. It will not allow overcharging or over discharging below the min/max voltage levels. You can even top it up between rides; an approximate guide, 15 mins of charging gives about 10 mins of riding time.
Are spare parts available?
Yes, we stock all spares, with most parts available on our website. If you need any other parts, just email us at firstname.lastname@example.org and we are more than happy to help.
Where can I get the bike serviced?
The bike is very simple in design and easy to service. The bike can be sent back to us for repairs and service (you will need to cover the cost of freight + service/repair) or alternatively your place of purchase or a local e-bike or bicycle shop may be able to help out with repairs too.
How can I charge the bike when I am away from 240v power?
You can charge it from your car using a 240v inverter, the charger will draw 80w of power so we recommend a minimum 100w inverter. Some cars have 240v outlets as a standard.
Is the bike easy to Build?
The bike comes 95% assembled with only the front wheel, handlebars to fit and power to connect. The bike comes with a complete manual and assembly instructions. We don't supply tools with any of our bikes, although, you will only need basic tools such as metric hex keys and metric spanners to build the bike.
Is this bike legal to use on the road or public areas?
Every state has different laws regarding electric bikes and usage and these laws are evolving and changing quickly. LPR Bikes recommend checking your local state laws for up to date info before riding in any public area's and we recommend riding the bike off road only and on private property.
At LPR Bikes Australia, we want you to ride with a smile, knowing that you purchased your bike with confidence. This is why we offer the original purchaser of a LPR12 Jnr MX Bike;
•2 years warranty on the frame/forks*
•6 months warranty on electrical components*
•12 months warranty on the battery*
•No warranty on consumable parts*
What do I do if I have a faulty product?
If you have got any warranty issues, the quickest and easiest way to get it resolved is to send an email to email@example.com with a description of the issue and photos of the affected parts.
Warranty Terms and Conditions
*This warranty applies only to the original owner of a LPR12 Jnr MX bike and is not transferable to subsequent owners. Consumable parts (including grips, tubes, tyres, cables, brake pads and saddle covering) are not covered by the warranty. The warranty does not cover water damage to the electronics, paint damage, rust, corrosion, modifications made to the bike, normal wear and tear, improper assembly or maintenance, installation of parts or accessories not originally intended or compatible with the bike as sold and costs of installation, assembly and disassembly. The warranty does not apply to damage or failure due to accident, abuse, misuse, neglect or theft. Costs such as assembly or transport are not covered by the warranty.
- Seat height
- 390mm - 490mm, quick adjust
- Handlebar height
- 570mm - 620mm
- Wheel base
- Frame / Fork
- Steel construction- Durable powder coated gloss finish
- Alloy 12', Sealed ball bearing, Rear wheel incorporates the drive motor.
- Rear 140mm disc brake
- threaded style, 1" ball bearing
- Package dimensions
- 79cm x 44 x 18cm
- Foot peg height
- Overall dimensions
- L 930mm x H 600mm x W 450mm
- Ground clearance
- Nylon rubber Pneumatic 12' x 2.4'
- 7000mAh 22.2v
- Brushless D.C.
- Run Time
- Up to 2.5 hrs**
- Charge time
- 2.5 hrs
- Top speed
- Parents can limit the maximum speed variably from walking pace to - 26km/h
- Foot pegs
- Bonded rubber, steel shank 45° pivot - spring return